Quote:
Originally Posted by johmei
The lines are cheap so get yourself something like 12 feet of silicon tubing and just change them all out. You will have to take the canisters out to reach some of the hoses and the engine cover to change the two under there (you could put new ones on the outside, leaving the old under the cover, just to try if it helps). Also remember the lines from your diverter valves to throttle body. Be careful not to break any connections as they are plastic and some lines tend to be stuck on there. I used a pick to loosen some of them as I pulled on the line.
|
Do you know the specific hose diameters?