Quote:
Originally Posted by DeFKnoL
True enough. Since the driver is an upgrade from PSI, I don't have the relavent specs to build a proper box. I built this sealed box according to intuition and it really rocks. It goes pretty low (sub 30hz with all that power) but the trade off seems to be the sound that I want or overloading my electrical system.
Sigh, I guess there is always an alternator upgrade and the big 3.
But I should stop while I'm ahead and not hijack the thread. I mainly wanted to point out that the MS-8 will shutoff (probably upon a detection in voltage drop).
|
OK, this is weird. I've been experiencing the same exact issue. No "No DSP response" message.... MS8 just shuts off, and after 10 seconds it turns back on. Everything is bolted on tight, ground is good, etc.
The weakest link is an 80 amp resettable fuse (the ones that also act as an on-off switch) but it doesnt get triggered.
I can live with it - when I turn up the volume that high, its probably causing serious ear loss anyway - but I was wondering if you ever found out what was going on?