|
fantastic thank you
I have a template for the spacers and am going to laser cut some test pieces...however i think the template is for the 8" enclosures, so may have to modify that.
Can you suggest a cross over setting for the DLS r4, earthquake, and dls rear?
(input sensitivity to 0 .. why?)
for oem's im going to start here: (unless you have a better suggestion)
Fronts/Rears are HP 120 to 180
under seats LP at 200
Thank you
Last edited by djbordie; 11-19-2012 at 06:18 AM..
|