Quote:
Originally Posted by robc1976
It is easy, 25-45 min job.
1. Remove DCI or box (whatever you have)
2. Remove upper radiator hose, let voolant drain a bit (I jacked the front of my car up and let it sit overnight).
3. loosen intake manifold
4. Loosen oil sensor on back of housing (mine was on there pretty good, easier to do this while housing is bolted down.
5. Take off oil filter cap and take filter out, wipe out any oil ECT.
6. lift up manifold a bit for acess to corner bolt on housing
7. Remove other bolts to housing and it is off.
I have pics of my hold housing if you want or need them
|
appriciate the writeup gonna go ahead and perform it soon...would you mind sending the pics? Your directions are awesome! Sounds easy from what you are saying