Quote:
Originally Posted by rwalker
The PS fluid reservoir relocation was a fun bit.
1) un-mount the PS fluid reservoir
2) remove the big steel bracket that bolts to the front frame
3) remove the mounting bracket from the reservoir
4) replace the mounting bracket upside down on the reservoir, above the lip to better clear the hood (I also put a little high-temp double-sided tape inside the bracket's ring to keep the reservoir from slipping out of the bracket)
5) fabricate a small, stainless, 45-degree angled bracket to mount the reservoir bracket to on the little nub behind the headlights
6) remount the reservoir to the nub+stainless bracket
With the above steps, there's a ton of room for the 3" ID hose to my cone filter in the fender.
The result:
|
Great idea for the power steering.. I may try something along these lines.. unfortunately when I made my first attempt at the intake, I had no spare car to use to buy parts and I had an obligation that night so I kinda forced the hose in just so I had a working car..
I will revisit this soon..