[4-series]

Originally Posted by picus

Sorry for the delay guys, not even see how I missed these. Anyway, might be too late but here goes.

1) You can clay as needed, you want to use a lot of lubrication and go light on the pressure, but no, if you use common sense you won't mess anything up.

2) You don't need to wait at all, just wait 24 hours in between layers of KSG if you go that route.

3) 6 months max, some guys get more but I like to play it safe. I usually do March then November, with some spray sealing/waxing in between.

4) AIO is a chemical cleaner, it will remove any sealant (including KSG) when you use it. So only clay when you need to remove contamination, otherwise AIO will strip previous layers itself.

Thanks Picus for the answers!