Quote:
Originally Posted by mdyates
Kevin,
I've been running map 5 on my now broken in IS w/DCT and I had to back down to e30 because of trims (not enough fueling per Terry) Guess I need the BMS flash.
Any way, my map 6 settings that come preloaded say 15.0 psi. Yours on map 6 is 16.5 psi?
|
Agree with high levels of E85 you need the backend flash. I ran a few tanks to test it & the car was happy with about 40% total alcohol. You need to remember to count in the 10% in 93 octane premium.
Yes my Map 6 is generally +1 PSI across the board over the default 335is Map 6. I run on average 95/96 octane fuel using a 93+100 mix. I did not want to get involved with E85 (the one E85 station is way across town) & potential fueling issues.
The log I put above in the thread is with the extra psi & the 93/100 mix. Terry said it was good to go. I have been running it since I went to the G5/ISO board
I ran the default map with straight 93 octane on the G4 board. Personally I don’t really recommend anyone stepping up the Maps unless they are willing to do it in stages & send in the logs to be sure you are not screwing anything else. I worked it up 1/2 pound at a time. I also believe with the aftermarket FMIC the charge is cooler & is also a big help when increasing boost.