BMW 3-Series (E90 E92) Forum - View Single Post - DIY: Passport X50 A-Pillar Hardwire-Step 1 of 5 -Introduction and wire harness

Energybiz · 04-21-2009, 07:34 AM

I did this over the weekend. Very simple, had to buy new torx driver and the fuse tap, but that was it. I bought the fuse tap at Pep Boys for $9.00 and it came with 4 extra fuses. The A pillar portion is by far the toughest part. Just be patient and dont force anything back into place. And FYI, I used fuse #7 in my 09 E92.
The install is virtually invisible.
Thanks

04-21-2009, 07:34 AM	#23
Energybiz New Member 0 Rep 15 Posts Drives: 2009 E92 Black Saphire Join Date: Apr 2009 Location: Louisville iTrader: (0)	Radar Detector Hardwire DIY I did this over the weekend. Very simple, had to buy new torx driver and the fuse tap, but that was it. I bought the fuse tap at Pep Boys for $9.00 and it came with 4 extra fuses. The A pillar portion is by far the toughest part. Just be patient and dont force anything back into place. And FYI, I used fuse #7 in my 09 E92. The install is virtually invisible. Thanks
	Appreciate 0 Quote