Nettodat Coding not working - what could be wrong ??
So I have a 2011 E90 with halogen lamps and AEs
I wanted to increase the AE brightness, and I read/was told that I would have to code via nettodat to achieve that.
I got the nettodat.trc for my NFRM module using the FSW PSW profile.
The hex values for PWM_SL_1_FKT_BL_TFL & PWM_SL_1_FKT_SL_TFL were showing as 10,00
I used NCS Dummy to update them to 0C,2C and create the nettodat.man file (A compare shows the change correctly)
I used the normal procedure for coding, except selecting coapiCodeSgByNettoData as the basic function (supplying nettodat.man as the value for the Nettodatenliste parameter)
The jobname was kept as SG_CODIEREN while executing the job, which completed successfully.
However, when I read back the NFRM module to confirm the changes, the nettodat.trc file shows the old values 10,00 for both keys.
What could I be doing wrong ??
I've used both the FSW PSW & revtor expertmode profiles and the result is the same.
Is it not sticking coz I have halogen headlamps ??
Please help
|