Quote:
Originally Posted by Psylight
I didnt get this part....I know there are hole...that is no doubt how the water is getting IN the spoiler...
|
been there done that. if it is fiberglass and it is not a solid piece it has an air gap. if you seal it up air is in there perminately. when the air gets hot the fiberglass will expand and will crack the paint. bank on it...
Quote:
Originally Posted by Psylight
Also, a fishing line would remove Betalink? I could see that happening for double sided tape...in fact...that is how I removed it the first time, except i used a thin rope...
|
just a suggestion.....you can try a hammer and chisel but would advise against that approach.
you could also try a heat gun for the glue.