Thanks for the help with parameters for datalogging. I went out tonight and did three 3rd gear pulls on COBB OTS E30 maps (v402). All pulls were done with the A/C off and DTC completely disabled. I have a 135i with the following mods:
-DCI
-DP
-FMIC
-Cobb
The weather was 81* and 80% RH. The first pull was uphill, the second was relatively flat, and the third was flat but the on an elevated section of highway with expansion joints causing a slightly rough ride.
I've recently replaced the clutch with a Spec 2+ and the turbos were replaced under warranty. The valves were cleaned 10k miles ago and plugs shortly thereafter. I put 4.25 gallons of e85 and topped off with 93 (~33% ethanol content).
I've attached the datalogs as txt files and was hoping someone could plot / provide insight. I appreciated any help y'all can provide!
|