Quote:
Originally Posted by xenon
When I did the same job I lined the letters up on a table and then stuck a 3" wide masking tape over the top to hold in that position. Then turn it over and remove the backing tape from the individual letters and then apply to the car as one. Once pressed down remove the masking tape et voila!
|
didnt trust myself doing it that way, but that would seem like a smarter option.
Checked the 'I' out and it does seem a bit wobbley due to the thickness of the 3M tape, hence why adjusting it after the initial first contact hasnt worked. Maybe I'll remove just the 'I' and try again with some tape from Halfords.