Quote:
Originally Posted by tylerdurdon
Hey man,
Grats on getting all in. I had the same situation (with the mic). Just be aware, the leads you are changing are not the ones going directly into the mic at the FZD. It's a little junction box down and behind your glove box (near where your fuses are). I'm too tired to go look at the moment, but I know I found the page from the manual listing that location somewhere here.
Hope that answers your question, if not, I'll check back tomorrow
|
Thanks! Sorry - I forgot to mention that. I did remove the glovebox and found the audio junction box on the right hand side - but before I started swapping wires I decided to double check to ensure the microphone was completely plugged in. When I removed the FZD - I noticed the wires were brown and black, rather than yellow and black.
Anyway - i guess the next step is to plug and play - see if swapping the wires works. If not - I have a bigger issue on my hands. I'll keep you guys posted.
Thanks!