Quote:
Originally Posted by Jklad
Hi, How much should you tighten the strut bolts, and the fuel lines?
Assuming good and tight, but any further info?
I didn't see this answered in the thread.
Thanks.
|
Fuel lines are 17 ft-lb but you need a special tool that goes around the nut on the fuel line for the torque wrench to fit into.
The strut braces use torque to yield bolts (one time use and must be replaced).
Strut brace to chassis
stage 1 - 74 ft-lb
stage 2 - + additional 100*
Strut brace to strut tower
stage 1 - 30 ft-lb
stage 2 - + additional 60*