|
I landed up using a 14mm 12 pt socket.
Completed this diy yesterday, took me 12 hours but I was going preety slow.
Thank you for the bungee strap recommendation. I had about 10 to hold everything back. I had some issues with the gasket falling out but I eventually got it. I would reccommend putting the spark plug guides in the vcg when installing. I tried to put the sparkplug guides on the head and then line up the vcg holes with guides and wasnt able to get it to work. Also, make sure the injector and coil pack harness is well out of the way. Also, I was not able to do this without taking the passenger strut bar off.
|