Quote:
Originally Posted by Orb
Harold, for the rear links, this one for sure- 33322283549 - it is good idea if you have Quaife and will reduce toe out under acceleration. That is were you should stop unless you load test the other two forward links for stiffness.
Spill the beens on what you checked out on the rear.
Orb
|
Hi. Looking into this and all parts on order or delivered except 2* these rear toe links. There is conflicting information as to whether this is required or avoided.
I think I read somewhere that someone installed these but removed because of NVH and not because of incompatibilities...
Also will I be letting my car down by not getting rear camber arms.
33322283885 and 6?
Thanks in advance.
Chris
P.s. I have birds b3 suspension setup currently.
P.p.s. basically same question as Ashmostro above (though i believe he had the lowering dependency cross wired between three two past numbers)....and this post from the 1 series forum.
Quote:
Originally Posted by exPat
Thoughts on how necessary the Toe Arms are? According to HP Autowerks, " For E82/E9X owners with just lowering springs, these are not a necessary requirement. For standard spring-only suspension installs, there is enough adjustment in the factory toe arms to bring them back into spec." |
Related links
http://www.1addicts.com/forums/showt...=794799&page=3
http://www.1addicts.com/forums/showt...php?p=14343397