Quote:
Originally Posted by robc1976
Thanks for the reply, I am assuming you mean "other side" as the other end (to the block)? Because it seems the built in spacer is welded in....I am probably not understanding correctly here lol!! If the OEM spacer is pressed/welded on how would I get it on the other side of where my Arrow is pointing?
|
Your water pipe picture has a hole on which the stud/screw comes in to tighten the pipe to the center core. You put the spacer under that hole (looking from above the pipe), in order to level the pipe end.
Just put the pipe on the RB turbo and you will notice where the spacer should be put in order to be able to tighten the pipe correctly on the turbo...