Quote:
Originally Posted by serotoninsteve
I think yes, it should still lock enough.
You could put some locktite.
Torque should be 122ft-lb,
but impossible to tighten using a torque wrench.
|
Hey,I did it,but the best way for me was taking the tie rod out,and that way the hole base turn more to the outside,and I was able to get a socket in there,with an extension,this way it was easy for me,I use the 24mm box wrench for the tie rod,I didn't need it for the control arms,this method can help someone out there also,now I will wait couple of weeks and do the alignment.