Completed the OEM alarm installation. It was quite easy to install the hardware and the coding took only 15 minutes, added the chirp, hood switch & HB when activated. Well worth the upgrade to have a full functional alarm system.
Quote:
Originally Posted by Neutrino45
matrix76, I don't think they are the same. At least not from Google Translate.
QUIT AKUST SCHAERF - QUIT ACOUSTICS SCHAERF
FUNK INNENRAUMSCHUTZ - WIRELESS INDOOR PROTECTION
My reply was to help monkawekrue to get his motion sensor to work.
|
Your right, it all made sense when I did the install,
Just one note related to the DIY, I had difficulty removing the rear dome light as discribed in the DIY. What I ended up doing was sitting in the back seat and then put your finger along the front edge if the dome light then gently pulling it toward me until the two front clips clear the headliner and it dropped right down. To reinstall it just put in the front edge first then push it up into place, the two metal tabs slide right in. This avoids any prying of the dome light. Worked well. OP'er, thank you for the DIY, it worked very well.