View Single Post
      08-24-2012, 04:40 AM   #7
TOGWT
Captain
TOGWT's Avatar
United_States
11
Rep
770
Posts

Drives: 630i
Join Date: Dec 2009
Location: Ponte Vedra Beach, FL / London, UK

iTrader: (0)

Lifetime Paint Protection


The technology for a lifetime protection for a vehicles paint film surface does not currently exist.

There is no polymer, synthetic or natural wax, or after-market product available that can provide a five year or lifetime protection to a paint film surface; read the fine print in the contract offered by car dealerships.

There is normally a clause that states you should return the vehicle for a "maintenance" application of the product (at 3 or 6 months intervals) failing to do this will void your warranty or the fine print will basically exclude every condition you could claim against

The primary protection provided for a modern water-based colour coat is a polythene paint that has a thickness of (127 - 178 µ) comprise a Primer coat of 2Mils (50 µ) a Colour coat of 1-2Mils (25 -50 µ) and Clear coat 2-3Mils (50 - 75 µ) An applied paint protection product is the entire barrier that provides protection for automotive paintwork besides the clear coat paint and this renewable barrier is probably less than 0.001Mil (0.0254 µm)

While it’s true that a polymer paints melting point is 350oF +, it is still subject to evaporation and erosion by the elements and vehicle washing. However its durability is approximately five or six months. The newer silica coating products actually exhibit a durability of two years or more (but not lifetime)

Most dealerships rely on the fact that few customers read the fine print on the contract; most contain a clause that states “it must be reapplied every 6 months and every 3 months on darker coloured cars (for which a service charge will apply)”.


[If it sounds too good to be true...it probably isn't] - Anon
Appreciate 0