|
Here are what my MOST blocks look like.
The one with only green wires is the upper block.
I flipped them around to show the numbers on the back, so they go from 5 4 3 2 1.
Am I correct in disconnecting both cables from position 2 on the upper block,
and putting the upper one in position 1 on the lower block, (which will bump the other
cables over. Current Pos 1 moves to Pos 2, Current Pos 2 moves to Pos 3)
and the the green cable in the bottom can go in position 3 on the bottom of the lower block?
|