BMW 3-Series (E90 E92) Forum - View Single Post

Aija · 11-03-2012, 11:20 PM

I have e92 and e39 that I drive often. Out of curiousity, will my aftermarket rims on the e92 fit on the e39?

Rims: have ICONZ 880ZR, 19x8 & 19x10, Front- 235/35/19 Rear 265/30/19) on my E92 335i.

Will these rims fit on a 2001 E39 5 series? I would like to have the rims on the E39.

Doing a little research I found that

E39 = PCD 5x120, centre bore 74.0mm and M12x1.5 bolt thread. ET 15-25
E90's = center bore 72.56 mm

Does the adapter only work going to a lower number?

11-03-2012, 11:20 PM	#1
Aija Captain 29 Rep 687 Posts Drives: 335Coupe 6-Speed! Join Date: Jan 2006 Location: California, Bay Area iTrader: (0)	E92 and E39 5series Differences I have e92 and e39 that I drive often. Out of curiousity, will my aftermarket rims on the e92 fit on the e39? Rims: have ICONZ 880ZR, 19x8 & 19x10, Front- 235/35/19 Rear 265/30/19) on my E92 335i. Will these rims fit on a 2001 E39 5 series? I would like to have the rims on the E39. Doing a little research I found that E39 = PCD 5x120, centre bore 74.0mm and M12x1.5 bolt thread. ET 15-25 E90's = center bore 72.56 mm Does the adapter only work going to a lower number? Last edited by Aija; 11-03-2012 at 11:26 PM..
	Appreciate 0 Tweet Quote