Quote:
|
Originally Posted by Kazman
i plan on going with "real" wheels... no replicas.
ive been tossing some ideas around with these specs.
front: 18x10 +19
rear: 18x12 +28 or an 11 with equivalent offset if the backspacing puts it too close to the strut.
got the specs from looking at bpsu07's setup, but with 3mm smaller offset in the front.
what brands do you have access too?
|
Only way to go is with real wheels. Rember im a LCI E90 so wider tear axle but my last set up was 18x10 from front 245/35 and 18x11.5 rear 285/30 CCW classics fully swissed polished lips orange powder coated face
My new set my boy just finished for me is WORK VS-XX 10" front 12" rear haven't mounted yet cause its winter so I'm not releasing offsets and tire size. Fully polished inner barrels, brushed clear centers, gold hardware and we chromed the outer lips for something different then other WORK set ups here's a few pics
If you need something made or have am idea and your budget gimme a shout and we see if there's anything for you