Okay after hours of trying everything I could, I'm still unsuccessful here. My car is a 2009 335i Coupe with iDrive. My Triple blink function has always been active through the iDrive system.
When I load NCSExpert via NFRM (not CAS or FRM in the initial steps to read the car), it reads FRM2_E89.C08 upon loading, and when I hit FA_Read and Execute it goes to FRM2_E89.C09. I started disassembling and reassembling the values in these Daten files (even FRM3_E89.C32) values for wert_01 to 05 using NCS Dummy.
Interestingly, wert_01's default values are 01 despite my triple flash being enabled the whole time (shouldn't it be 03 then?). I recoded the car. When coding is finished, the checkmark next to Triple Flash in my iDrive is gone. I turn the car off and then back on, and it still only blinks 3 times and the checkmark is re-enabled in iDrive. Seems like whatever I did to the Datens did not work.
Also of note: When disassembling the Daten file in NCS Dummy as per muhanda1's PDF, it never asks me for a Configuration file as indicated in the steps of that PDF... It simply saves the txt version of the Daten for editing.
My B 00341500 reads as: 0010,28,24,28,24,28,34,28,2C,28,34,28,34,00,00,00, 00. There is a 2C where you guys reportedly have a 2F :/
Last edited by dbworld4k; 04-17-2014 at 05:17 PM..
|