View Single Post
      11-28-2007, 11:47 PM   #58
!Xoible
Banned
United_States
823
Rep
46,029
Posts

Drives: ....
Join Date: Nov 2006
Location: .

iTrader: (4)

Garage List
2008 M3  [4.00]
2007 335i  [9.00]
2008 528i  [8.00]
2006 Infiniti - G35 ...  [8.00]
Quote:
Originally Posted by longtran View Post
sorry for the vague DIY, but i think this should be enough to get you going.

this will work with your blacklines only. your oem can not do this. you can use your oem as practice.


before doing this, please becareful with the hot boiling water...do this at your own risk.




1. remove all the electrical part. now we are left with just plastic

2. fill a big pot with water. put it on the burner.

3. once it starts to boil drop your taillight in

4. let it sit for 15 minutes or so.

5. take them out and try to find a location to pry them apart. (once you get a little opening, the rest should follow. BE VERY CAREFUL YOU DO NOT CRACK THE LENS)

6. remove the clear pieces underneath.

7. cover up all the area you do not want to be painted.

8. paint the housing with the color of your choice. ( for whitelines, do not use white paint. use chrome paint).

9. use a dremel to clean up all the black plastic that was left on the lens when you remove the lens. (you will know waht i am talking about when you do this).

10. make sure paint is dry.

11. seal that sucker up and you got yourself ____lines.

12. i havent got this far yet. but i was thinking of using silicon.





here are some pictures.










I missed at what point did you add the noodles to that broth?
why are you making pho in the middle of ur installs man?!!
Appreciate 0