Doesnt look easy
They say you need to put something about as thick as a ice-cream stick behide the mirror and gently pull it away from its mountings from 4 corners, while being carefull not to break it.
Then remove the electric drive by removing the screw in the middle of it holding it to the housing, and then pulling the drive out.
You can then see clips on the inside where the front painted housing clips on, and unclip it
Then you can see the multiple clips holding the part you need to replace to the piece connected to the car.
use a thin screwdriver to unclip them
Assembly is reverse
__________________
BMW if you are reading, I need a job, Please.
|