Quote:
Originally Posted by timmahh
Alright.. I'd like to confuse the hell out of you now, even though my intention is to help lol
[img]http://www.fuzi0n.com/imgz/cars/bmw/sirius/dataspikeMOST1.jpg[img]
Current MOST Block config:
[img]http://www.fuzi0n.com/imgz/cars/bmw/sirius/dataspikeMOST2.jpg[img]
New MOST block config:
[img]http://www.fuzi0n.com/imgz/cars/bmw/sirius/dataspikeMOST3.jpg[img]
First, I would label them 1a, 1b, 2a, 2b.. etc. the 1a and 1a a might cause confusion if everything gets disconnected [the box may come apart], especially since 1b and 1b, while inline, are from two different devices. If it were the same devices then everything would be in parallel and not a loop or ring.
So it looks like you can probably unplug 3b and move it to position four on the top, so just to the right one spot.
Then take 3t and put it where 3b was. With this you've now taken what was the final device, the bottom 3b, and had it send the link to the sirius unit, which is good, but now your loop is broken. It stops at the Sirius unit and never makes it back to the head unit. So now you'll take the bottom 3t and plug it in next to 3b, in position 4.
So esentially 3b top has become 4b, and 3t top has become 3b. 3t bottom has become 4b bottom. (see why the same letters get confusing?!?!)
|
Essentially, yup! Thanks!
