Quote:
Originally Posted by xzibit a
Im right there with you i much perfer concave to a lip. I cant remember which forgestar wheel it was but i was looking at an 18x12, i know they make em. XXRs are super cheap and i know you can get the 521(LM STYLE ) in 10" WIDE VERSIONS
CF5-Super deep concave
18"
18×10 offsets from +10 to +50
18×11 offsets from +23 to +63
18×12 offsets from +36 to +75
|
no way i can fit an 18x12.. i mean.. maybe in the rear, but the low offset is going in the front and that's as LOW as i can go, 10.5" MAX width... in the rear i could go an 11 or 12 no worries, and even a 10 offset is easy.
for a 10" wide i need a -5 for perfect, 0 preferably, and +5 AT WORST. i could MAYBE do a +10 with a 10mm spacer but it's still not perfect (5mm off)
Quote:
Originally Posted by ACEE
|
i can't find anything online about their offsets, and they haven't responded to emails or PM's..
36 is way WAY too high, weakkk haha
as much as i don't want a lip, if i NEED to get a lipped wheel, forgestar F14F's will probably be my choice as they're not HORRIBLY priced, and look mighty nice imo still.