I'm in the process of retrofitting a TCU module into my 2006 E90. I need to turn bluetooth on but if I try to read or write the TCU I get the following error:
Here is a copy of my error log:
ERROR! Modul: A_E60TCU.IPS, Proc: StartDiagnose, LineNr: 208, ErrorNr: 2060
COAPI-2060: coding faulty (general)
TELE60_2, DIAGNOSE_MODE: ERROR_ECU_BUSY_REPEAT_REQUEST
>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2060
CODIERDATEN_LESEN
ERROR! Modul: A_E60TCU.IPS, Proc: StartDiagnose, LineNr: 208, ErrorNr: 2060
COAPI-2060: coding faulty (general)
TELE60_2, DIAGNOSE_MODE: ERROR_ECU_BUSY_REPEAT_REQUEST
>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2060
CODIERDATEN_LESEN
Any help would be greatly appreciated! Thanks! I'm using NCSExpert version 3.1.0
Also, I am able to access the TCU in INPA to pull codes and read other information.