I read through a lot of the bmw coding success thread.... not much mentioned about this peculiar problem i have...
I have a 06/09 build of e92 M3
Connected the cable... waited for the red LED to diasappear... started INPALOAD went to the air bag got the IFH-0009 Error...
decided to skip the airbag thing... went to the NCS Expert and pressed F1>F3>e89>CAS
got the Vin is Faulty error...
However....
My friend has an 06/08 build
Connected the cable... waited for the red LED to diasappear... started INPALOAD went to the air bag got some error forgotten which was it...
also decided to skip the airbag thing... went to NCS Expert went to F1>F3>e89>CAS got the VIN and VO to come out... pressed F6 and wanted to read the ECU... (CAS) but this time... it put out an error of the CABD-2000 Error
Do i need to disconnect pin 8?
I downloaded the NCSEXPER.RAR from the BMW Coding success thread and got the cables from here:
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
Thanks for any help!
Andre