Quote:
Originally Posted by import36
ok...found the F07 fuse in the box that houses the DME...its a 50amp fuse for the electric water pump. unfortunately it wasn't blown. car is just sitting on the ground in the garage....so i'm not gonna bother with trying to get under there and testing the voltages. having her towed to the dealership tomorrow. 
thanks for the suggestions queensfield  |
It's the box unit on top of the battery that is fused.
The fuses (if what we call them) cannot be changed. What I did I disconnect the red cable (to the far left), removed the black connector on the red cable and plug the cable to the next available power connection on the right. I have the 2E84 dme code after I shorted the circuit while installing the PWM kit. Either you reconnect the red cable or change the whole box unit. Hope this helps.