[paulkim510]

I was finally able to get my DAMN trim off! It was pretty easy once I figured out what my problem was. (My torx screws weren't unscrewed all the way) Some important tips to follow:

1) It may sound stupid...but make sure all your Torx screws are unscrewed all the way! You will feel that the screws are loose.
2) Get a small screw driver to pull up some of the rubber on the top corner of the steering wheel trim. Pull the rubber part up and make your way across from left to right and make sure the two little rubber tabs are out.
3) Pop the top INNER left or right corner of the steering wheel trim over the horn. (This may require a little force) I think it would be better to start from the left because there is a wire on the right side you don't want to brake or yank off.
4) There are 4 Torx screws on the inner part of the trim that I unscrewed to get the wires off.

Hopefully this will help people like me who were struggles to get this stupid thing off.