|
Lighting Related:
1) Factory Angel Eye Brightness Coding! Make it whiter and brighter! 2) Euro corner delete:
a. Turn off amber corners when headlights on
b. Turn off headlight corner LED’s when headlights on
c. Turn on/off LED’s when high beams are activated
d. Enable/Disable LED’s and corner lights when parking lights on
3) Welcome light activations
a. Set how the welcome lights come on –
b. Fading or Instant on for Angel eyes, corner lights, fog lights, rear fog
lights, rear tail lights, rear brake lights, under handle lights, parking
lights, and LED’s
4) Turn off inner/outer, or both daytime running lights on rear taillights 5) Make the emergency signals double blink when turned on
6) Make the fog lights cornering lights (for cars equipped with fog lights) 7) Remove light errors for aftermarket lighting, LED’s etc
a. This will remove the flickering/pulsing as well, and the warnings.
8) Enable all four front headlights for brights and brights flashing
9) Enable angel eye Daytime Running Lights for pre 2007 vehicles
10) Turn on the Xenons with your Trunk Button (10-12 models)
Cluster Related:
1) Enable BMW Efficient Dynamics Display
a. This shows you two arrows in the instrument cluster, and tells you to shift up or down and when to execute the shift for maximum fuel economy. My economy has increased drastically from using it.
2) Turn off the annoying “key in ignition” gong
3) Add the digital velocity to Non-M cars (V=## mph)
4) Add instantaneous digital MPG to M cars
5) Remove the over optimistic correction to the digital speed display
6) Make the low fuel warning come on earlier or later (useful for M cars)
|