BMW 3-Series (E90 E92) Forum - View Single Post - Tapping into reverse lamp wire in the front?

Broendbjerg · 05-30-2012, 03:24 AM

That should be easyly connected at the FRM in the left side of the driver side footwell:

According to WDS it would be Pin 47 on X14261 or Pin 9 on X14260 (either left side or right side reverse lamp. X14260 and X14261 are the two large connectors on the same side of the FRM module.

See this:
http://wds.spaghetticoder.org/en/svg...57.svg?m=e8790

Hope it works out for you!

/Broendbjerg

05-30-2012, 03:24 AM	#2
Broendbjerg Member 0 Rep 12 Posts Drives: BMW E91 320d Touring Join Date: May 2009 Location: Denmark iTrader: (0)	That should be easyly connected at the FRM in the left side of the driver side footwell: According to WDS it would be Pin 47 on X14261 or Pin 9 on X14260 (either left side or right side reverse lamp. X14260 and X14261 are the two large connectors on the same side of the FRM module. See this: http://wds.spaghetticoder.org/en/svg...57.svg?m=e8790 Hope it works out for you! /Broendbjerg
	Appreciate 0 Quote