Quote:
Originally Posted by fazman
Yeay, i got my AE's working... not gonna give any more update other then that 
just kidding. Okay here is what i did:
1) Make sure i'm on map 0
2) Load INPA and make sure i have both black dots so i know my cable works
3) Close INPA (very important to do this)
4) launch TOOL32.EXE
5) click on "jobs" and start typing out: steuern_reset_kurzshlussabschaltung
6) click on the text box located under arguements and enter the various hex values (you will need to try both check marked and unchecked for the box that says DATA). Press F5 or double click on the job name to send each command one by one
a) arguement = 0x0 (received error result)
b) 0x1 (received error result)
c) 0x2 (received error result)
d) 0x3 (received error result)
e) 0x4 (received error result)
f) 0x5 (received error result)
g) 0x6 (received error result)
h) 0x7 (received error result)
i) 0x8 (received error result)
j) 0x9 (received error result)
k) 0xa (received error result)
l) 0xb (Got my first OKAY, and started to jump up and down with joy)
7) went back to the job for reading the counter and instead of showing 50... it was now 1
8) closed TOOL32.EXE and open INPA
9) cleared all errors in the FRM
10) start my car and enjoyed seeing my driver side AE alive again  |
Wow, I'm so relieved you got yours working haha that means mine should be good too once I get the cable in the mail!!!
It should be another two weeks before I get the cable so please stay live on this thread haha I might need you for some help if I can't get things working. Quick question though, what do you mean in your step 1 about being on map 0? What is that?
Congratulations on getting it to work!!!