Quote:
Originally Posted by DMETune
- Unless you see something here that I don't, these claims are not derived from the posted data.
- I'd appreciate it if we could keep this thread as a clean technical discussion and avoid promoting products.
Thanks in advance
|
according to the posted data the OP said that the turbos were good for 42.25lb airflow 1 lb airflow is good for approx 10hp SO 42.25x10= 422.5hp
peak boost is shown in the middle of the map as 2.7bar (2.7 x 14.6psi = 39 - 14.6(atmospheric pressure) = 24.8 MAX PSI)
max boost at max flow/choke point is 2.2 bar (2.2 x 14.6 = 32 psi -14.6(atmospheric pressure) = 17.52 PSI BOOST at choke point)
once someone translates the map to either CFM or Lb/min and puts some efficiency % to the islands I can get as TECH as you want
Anything missing?