View Single Post
      04-26-2012, 09:51 AM   #9
Timmayy
Private
United_States
0
Rep
50
Posts

Drives: 09 E92 335i Blk/Blk xDrive 6MT
Join Date: Mar 2012
Location: Seattle

iTrader: (0)

If you look at the terminal on the JB4 harness that you have to insert into that green connector you can see it has a small dart on the one side that protrudes in order to lock it inside the the connector. That's what you're pushing on to release it. The terminal on the JB4 harness is identical to the one BMW uses.

Make sure you apply pressure on that dart before you start pulling it down, out of the connector, or it will dig into the plastic.

Also, once you get it out, make sure that you push the terminal on the JB4 far enough into the connector to get that dart to spring out or else you'll wind up with a loose connection.

I just installed my JB4 last weekend and it took me a couple tries before I was able to slide it out.

Last edited by Timmayy; 04-26-2012 at 09:52 AM.. Reason: spelling
Appreciate 0