Quote:
Originally Posted by Efthreeoh
I have the same exact Craftman set and it has served quite well on all my maintenance work on the E90.
|
Yep, me too. Saved my butt when I did the filter housing gasket replace, and rounded the e-torx under the manifold with a standard ring spanner (I then had to remove the manifold, hammer on the proper e-torx socket, and wrench it off - I had purchased all new bolts with the gasket.) The only e-torx that I've found that this set wont accommodate is the one at the rear center point for the front strut brace.