Although I admit I have not read this entire thread, I'd like to add this bit of info. My situation is different in that currently my xdive system is not working (I think it's the transfer case servo motor that is toast on mine, BT error says something like transfer case - clutch position unknown). Anyway, I've been driving aorund in 2wd for about 6 months. ABS, DSC, cruise, and 4x4 don't work. Everything else works fine (wipers, brake lights, speedo, odo, etc.). I've got a few codes thrown. Those codes can be cleared using Bav Tech. If someone is really adventurous, you could splice into transfer case wiring that goes to the servo motor and put your switch in there. Not advocating that at all, but just thought I'd throw that out there. Not sure what that would do about errors, etc., but my xdrive hasn't worked for months but everything else (other than Christmas tree error lights) is fine. Just Fyi.
|