Quote:
Originally Posted by Viktimize
Hard to say, but those codes are probably to do with you pulling pins out and messing around, so I would try clearing them. If you were just cranking and not starting, and you never pulled the fuel pump fuse, then yes you could be flooded.
|
Clearing them didn't work.
I think the codes are from pulling the connector in the DME. I never touched the pins for those units. Aside from the throttle errors which are from resetting adaptations, I believe everything is on the same connector. X60007 which is the grey connector beside the one with the o2 sensor pins. I think the pins got bent and are not making contact. I can't make out any bent pins with my eyes. I sent it to the dealer. I don't think they are going to be able to figure it out.