Quote:
Originally Posted by Otherbloke
Guys thanks for the great thread, am nearly there with my retrofit.
Microphones I see on the thread have 2 wires, but there are 3 connections on my Mic? Could anyone advise which number pins on the mic go to which pins on my new professional HU?
Cheers,
Ian
|
People have been using two out of laziness since a shield is not absolutely necessary for function. Looking at the pins point-on, from left to right, they're mic+, mic- and shield. I strongly recommend you use shielded wire, though soldering the shield to pin3 isn't especially critical (attaching it on the MULF side is).