Quote:
Originally Posted by kaigoss69
You're welcome. Also, I might have mentioned this before, but your calibration volume is VERY high. I never went above -25dB and right now I'm using about -43dB.
|
Really? Ive worked with Taibanl on this config and its netted the best sound so far. I think maybe because my speakers are all powered from the MS8's internal amp (except underseats).
Quote:
Originally Posted by kaigoss69
Oh and 1 more thing, during calibration, switch the filter on the JL amp for the underseat channels to LP, and set the frequency at about 220 - 240Hz. That will cut off any higher frequencies from the sweep and help you get better midbass.
|
The under-seats are on CH1 & 2 of the JL with the only X-Over settings for those channels listed as OFF/HP So ill leave on HP and change the freq for calibration?
So let me make sure I got this right?
LEAVE All MS8 settings the way they are & make adjustments only on amp at this point.
- Set CH1/2 to 220/240hz
- Run calibration with the sub disconnected
- Hook sub back up
- Move X-over back to 80hz and enjoy DONE?