Quote:
Originally Posted by Zoraster
1. The mat plug is a small four pin located under the seat at the rear. Unplug it.
2. Disable OC3 in the airbag module with NCS.
3. Clear error codes with Inpa.
4. Profit
|
If you are going to disable the sensor in the module, is there really a need to unplug it under the seat? And does this without a doubt still allow the passenger airbags to deploy in an accident? I've got the seat mat sensor problem, but it is intermittent. The only thing I've been able to find so far is a module macht schnell makes that disables the warning light when racing seats are used, but it also disables the airbags on the passenger side. I don't want to disable my airbags at all. I just want to get rid of the check for the sensor on the passenger side.. essentially keeping that airbag enabled at all times.