Quote:
Originally Posted by dobbo99
fail - tried this last night and the rattles still there this morning.
i have however, managed to get to a point where I only get the rattle under full acceleration, and only from about 3.5k rpm upwards.....
random
but i feel im getting a tad closer.
|
Did you manage to find the conduits which are situated passenger side near the rear of the engine compartment. There is a bunch together and two are supported by rubber fastenings onto a metal bracket. Follow these down as far as you can reach they go quite some way to the bottom of the engine bay. I connected together the 3 large ones and put cable ties around in two positions, one as low as I could reach and one in the middle leaving the original 2 connected at the top on the original bracket.