Quote:
Originally Posted by psmitty95
I'm have to dyno Saturday since i already have an appointment so i'll clean it up with an E85 mix. I plan on doing 50/50 E85 then doing 2 pulls with map 5 and 1 pull map 2 just to give an idea what power I should have without E85.
|
Just remember E85 can be used for timing corrections on the same boost pressure. That's what I use E85 for (Not going over 20% as of yet, still waiting to see if this fueling system can handle it long-term), and it essentially does what an FMIC would do, preventing timing drops. Also, remember map 5 needs three WOT pulls throughout the RPM band in 3rd gear to adapt, so keep that in mind when dynoing.