Quote:
Originally Posted by Transport3r
Hey guys, I just attempted this retrofit, I seem to be stuck at the coding part.
HARDWARE:
-2007 E92 335i
-no Idrive, with USB and with phone prep (acoording to options list)
-MULF2-HI (small sticker, no bluetooth logo) in the trunk
-no antenna wire in the footwell, wired my own dipole antenna in the trunk
-Mic wires taken from TCU patch into MULF connector.
CODING:
Added $664 to the FA and wrote to CAS and NFRM
Did SG_CODIEREN to the 2URAD and 2MULF
Did SG_Reset to both 2URAD and 2MULF
PROBLEM:
My radio shows a "phone" option but instead of a phone icon above it, it has 2 dashes there:
- -
Phone
When i press the button, nothing happens for a while and then the radio behaves like the button next to "phone" was pressed (shows BC menu)
Any Ideas about how to fix this? I read people had success coding with a blank .man, but my understanding is that their phone option didn't show at all. In my car it seems like the radio knows about the BT, but the MULF doesn't respond, so the readio picks the next best option (Literally).
Thanks guys!
|
something like this?
get hold of revtor's profile for ncs expert.
do a blank .man file coding to the rad2.
that's what i did to solve mine in a car with similar hardware as yours when i was in the same situation.
instructions
http://www.e90post.com/forums/showpo...11&postcount=3