Quote:
Originally Posted by Mpy18
plastidip them !! i did it on mine, looks puuuuuuuuuurfect ! 5 bucks  |
any pics? did you get them done locally? i would have to probably call around and ask if anyone does them here in Houston... thanks
Quote:
Originally Posted by Efthreeoh
The lifting pad snaps in place where the holes are so you could jack it up there. However the proper way to lift the chassis is jacking it up from the front-center and rear-center jack points and set the car down on jackstands underneath the lift points. i'd wait until you get the pads installed. And buy some extra while your at it so the next time one goes missing you have a replacement on hand.
Look in the DIY section for how to lift the E9X chassis. We've all posted several DIYs on the subject.
|
Yes, thanks i've seen those posts, i should probably life from the center lift points, but i normally just go with one side, then pull tire, do whatever work, put back down, :-) thanks for the advice on the pads, already on order
