View Single Post
      02-22-2014, 12:07 AM   #14
BigMacSmallFries
First Lieutenant
123
Rep
353
Posts

Drives: '19 M5C 911 Turbo F430 GT3 RS
Join Date: Aug 2010
Location: N/A

iTrader: (1)

Quote:
Originally Posted by cn555ic View Post
here is the wiring for passenger side...make sure you see the pins it suppose to connect to the original harnass on passenger side...from pins 1-6 and then re wire the lci harnass to the exact colors I just posted that way when it mates with the oem harnass the wiring is exactly as I posted below

After its wired correctly, you are going to need some coding done to the car to make the lci work correctly...You will have super fast blinking blinkers and possible a turn signal malfunction.
Quote:
Originally Posted by zamba0321 View Post
just an update. So I had the drivers side mostly working, and the passengers side not at all. Then I mirrored the passengers side from the pinout from the drivers side. With your chart I noticed three wires were still not right, after correcting them on both sides I now have everything working. Still a mistory to me why two shipped sets of retrofit harnesses didn't work...

Anyways thanks for the help and happy LCI user here now.
Quote:
Originally Posted by unrealii View Post
This thread has been super helpful.

I snapped off the cover of my connector and was able to pull all the pins out of the passenger harness. For reference above, I connected black with blue strip on pins 2 and 4, and purple and bluestrip on pin 3.

Working on driver's side then passenger side trunk.
Quote:
Originally Posted by 3seriespower View Post
wow, its very woth it, i just got the same problem on my LCI just got today, everything works fine except the bars, let me know work in moving the cables the way it supose to be.
thank you
Quote:
Originally Posted by E93MAC View Post
I moved my cables just the way the car cable had them and it worked flawlessly.

The problem I'm still having is to know the correct pin out on the passenger side for the big light.

I have tried the listed 1-6 pins in this thread, it didn't work. I have tried to lay them out the same as the pins coming from my car cable. Didn't work. My LCI tail lights are also the Euro version. Not sure if that makes a difference or not.

Can anyone assist?

Thanks!


Hey guys,

I'm having this problem right now with the E93. The taillights are lighting up randomly. Is the photo of the sheet stating how to connect the colours right or not? It seems like it didn't work for everyone. Hoping to correct this tomorrow on my own.
Appreciate 0