I guess it was a good set. These matched up perfectly and as far as the lower bolts, I had no issues lining them up. The supplied bolts didn't fit but I made up a set with some extra hardware I had and that was that...
Quote:
Originally Posted by sexye92
the turbo flange on the dp is larger then the flange on the turbo, so the clamp doesnt like to close all the way, the bolts for the exhaust have too large of a head to fit a socket or wrench on properly, and the bolts shanks are the same size as the stock exhaust so its not only a pain to get them thru it, it bends some threads getting them thru. not to mention they are just made shitty inside and out
|