These are my headlights before and after I used the meguiars headlight restoration kit. It knocked down some the smaller rock chips. The kit came with 1000 grit and 2000 grit wet sanding pads, meguiars plasticX, meguiars headlight protect, and a buffing drill attachment. I'm wanting to get rid of the larger rock chips, considering trying a 800 grit wet sand and then 1000, 2000 then plasticX then a sealant.
My question is if I get more aggressive with the wet sanding is it going to compromise the plastic causing it to be more prone to oxidation in the future. Or have I already done that and should just continue with the project. The larger rock chips are hard to see in picture but they are there and look even worse with the lights on at night.
Sorry for the
